Levelling of helicopter-borne frequency-domain electromagnetic data     

Bernhard Siemon 《Journal of Applied Geophysics》2009,67(3):206-218

For about three decades helicopter-borne electromagnetic (HEM) measurements have been used to reveal the resistivity distribution of the upper one hundred metres of the earth's subsurface. HEM systems record secondary fields, which are 3–6 orders of magnitude smaller than the transmitted primary fields. As both the primary fields and the secondary fields are present at the receivers, well-designed bucking coils are often used to reduce the primary fields at the receivers to a minimum. Remaining parts of the primary fields, the zero levels, are generally corrected by subtracting field values recorded at high altitudes (standard zero levelling) or estimated from resistivities of neighbouring lines or from resistivity maps (advanced zero levelling). These zero-levelling techniques enable the correction for long-term, quasi-linear instrumental drift. Short-term variations caused by temperature changes due to altitude variations, however, cannot be completely corrected by this procedure resulting in stripe patterns on thematic maps.Statistical methods and/or 2-D filter techniques called statistical levelling (tie-line levelling) and empirical levelling (microlevelling), respectively, used to correct stripe patterns in airborne geophysical data sets are, in general, not directly applicable to HEM data. Because HEM data levelling faces the problem that the parameter affected by zero-level errors, the secondary field, differs from the parameter generally levelled, the apparent resistivity. Furthermore, the dependency of the secondary field on both the resistivity of the subsurface and the sensor altitude is strongly nonlinear.A reasonable compromise is to microlevel both half-space parameters: apparent resistivity and apparent depth, followed by a recalculation of the secondary field components based on the half-space parameters levelled. Advantages and disadvantages of the diverse levelling techniques are discussed using a HEM data set obtained in a hilly region along the Saale River between the cities of Saalfeld and Jena in central Germany. It turns out from a comparison of apparent resistivity and apparent depth maps derived from levelled HEM data that manually advanced zero levelling of major level errors and automatic microlevelling of remaining minor level errors yield the best results.  相似文献   

Synthetic Spectra of Long-Period Variables: A First Comparison with ISO Observations     

Rita Loidl  Josef Hron  Susanne Höfner  Uffe G. ørgensen  Bernhard Aringer  Franz Kerschbaum 《Astrophysics and Space Science》1997,251(1-2):243-246

Exploratory synthetic spectra were computed for carbon-rich long-period variables. We used dynamic model atmospheres of Höfner &; Dorfi (1997) and calculated partial pressures, absorption- and scattering coefficients as input for the spectral synthesis code of Jørgensen et al. (1992). First ISO SWS-observations of the carbon-Mira T Dra are compared with our synthetic spectra.  相似文献   

Spherically symmetric cosmological perturbations in the de Donder gauge     

Mark Israelit  Bernhard Rose  Heinz Dehnen 《Astrophysics and Space Science》1994,213(2):317-326

Cosmological perturbations on a F-R-W background are considered in a modified de Donder gauge. To guarantee the energy-momentum conservation for the perturbations in the de Donder gauge a compatibility condition is obtained. Finally we present the basic equations for the propagation of spherically symmetric perturbations. These equations are the basis for investigating the influence of cosmological epoches on the growing of density contrasts.  相似文献   

HST/STIS observations of the high-velocity interstellar cloud HVC 291.2−41.2+80: a warm, mainly ionized high-velocity cloud     

N. Lehner  F. P. Keenan  K. R. Sembach 《Monthly notices of the Royal Astronomical Society》2001,323(4):904-910

We present intermediate-resolution HST /STIS spectra of a high-velocity interstellar cloud ( v _LSR=+80 km s⁻¹) towards DI 1388, a young star in the Magellanic Bridge located between the Small and Large Magellanic Clouds. The STIS data have a signal-to-noise ratio (S/N) of 20–45 and a spectral resolution of about 6.5 km s⁻¹ (FWHM). The high-velocity cloud absorption is observed in the lines of C  ii , O  i , Si  ii , Si  iii , Si  iv and S  iii . Limits can be placed on the amount of S  ii and Fe  ii absorption that is present. An analysis of the relative abundances derived from the observed species, particularly C  ii and O  i , suggests that this high-velocity gas is warm ( T _k∼10³–10⁴ K) and predominantly ionized. This hypothesis is supported by the presence of absorption produced by highly ionized species, such as Si  iv . This sightline also intercepts two other high-velocity clouds that produce weak absorption features at v _LSR=+113 and +130 km s⁻¹ in the STIS spectra.  相似文献   

The Market Gate of Miletus: damages, material characteristics and the development of a compatible mortar for restoration     

Siegfried Siegesmund  Bernhard Middendorf 《Environmental Geology》2008,56(3-4):753-766

The indoor exhibit of the Market Gate of Miletus is unique for an archaeological monument. The reconstruction of the gate was done in such a way that most marble fragments were removed leaving cored marble columns 3–4 cm in thickness. These cored columns were mounted on a steel construction and filled with different mortars or filled with specially shaped blocks of brick combined with mortar. All the missing marble elements were replaced by copies made of a Portland cement based concrete, which is compositionally similar to the original building materials. During the Second World War the monument was heavily damaged by aerial bombardment. For 2 years the Market Gate of Miletus was exposed to weathering, because a brick wall protecting the gate was also destroyed. The deterioration phenomena observed are microcracks, macroscopic fractures, flaking, sugaring, greying, salt efflorescence, calcitic-sinter layers and iron oxide formation etc. The rapid deterioration seems to be due to indoor atmospheric effects, and also by a combination of incompatible materials (e.g. marble, steel, mortar, concrete, bricks etc.). Compatible building materials like mortars or stone replacing materials have to be developed for the planned restoration. The requirements for restoration mortars are chemical-mineralogical and physical-mechanical compatibilities with the existing building materials. In detail this means that the mortar should ensure good bonding properties, adapted strength development and not stain the marble when in direct contact. The favoured mortar was developed with a hydraulic binder based on iron-free white cement and pozzolana based on activated clay. A special limestone and quartz sand mixture was used as an aggregate. The cement was adjusted using chemical additives. Specially designed tests were applied extensively to prove whether the developed mortar is suitable for the restoration of this precious monument.  相似文献   

The effect of As, Co, and Ni impurities on pyrite oxidation kinetics: Batch and flow-through reactor experiments with synthetic pyrite     

Stephen Lehner 《Geochimica et cosmochimica acta》2008,72(7):1788-1800

Pyrite samples synthesized with As, Co, or Ni impurities and without added impurities were oxidized in batch and mixed flow-through reactors in the presence of 1 mM ferric iron, at pH 2. Six samples from each dopant population were used to provide a statistically robust comparison; two natural samples from Leadville, CO (major impurities Pb, As, Bi, Ag, Zn) and Elba, Italy (Co, As) were also included. In each experiment, three reaction progress variables were monitored: ferric iron, ferrous iron, and sulfate. The pyrite samples with impurities have average oxidation rates that are faster than the undoped samples, with As- and Co-doped pyrite having the highest rates. As, Co, and Ni were released to solution in accordance with their concentrations in the solid samples. As concentrations in the batch reactor experiments tended to remain constant, in contrast to Co and Ni, which increased over time. Initial rates, calculated from the batch reactor experiments, were faster than the steady-state rates calculated from the mixed flow-through reactor experiments. Apparent rates calculated using sulfate were faster than apparent rates calculated using ferric and ferrous iron, reflecting oxidation of ferrous iron in solution by dissolved oxygen. The results imply that impurities in pyrite do contribute to its reactivity, in agreement with studies using electrochemical methods. Oxidation rate differences among pyrite samples with different impurities are probably too small to warrant explicit consideration in environmental modeling applications, but are important to understanding pyrite oxidation mechanisms and semiconducting properties.  相似文献   

Scalar-Flux Similarity in the Layer Near the Surface Over Mountainous Terrain     

Eleni Sfyri  Mathias W. Rotach  Ivana Stiperski  Fred C. Bosveld  Manuela Lehner  Friedrich Obleitner 《Boundary-Layer Meteorology》2018,169(1):11-46

The scaled standard deviations of temperature and humidity are investigated in complex terrain. The study area is a steep Alpine valley, with six measurement sites of different slope, orientation and roughness (i-Box experimental site, Inn Valley, Austria). Examined here are several assumptions forming the basis of Monin–Obukhov similarity theory (MOST), including constant turbulence fluxes with height and the degree of self-correlation between the involved turbulence variables. Since the basic assumptions for the applicability of the MOST approach—horizontally homogeneous and flat conditions—are violated, the analysis is performed based on a local similarity hypothesis. The scaled standard deviations as a function of local stability are compared with previous studies from horizontally homogeneous and flat terrain, horizontally inhomogeneous and flat terrain, weakly inhomogeneous and flat terrain, as well as complex terrain. As a reference, similarity relations for unstable and stable conditions are evaluated using turbulence data from the weakly inhomogeneous and flat terrain of the Cabauw experimental site in the Netherlands, and assessed with the same post-processing method as the i-Box data. Significant differences from the reference curve and also among the i-Box sites are noted, especially for data derived from the i-Box sites with steep slopes. These differences concern the slope and the magnitude of the best-fit curves, illustrating the site dependence of any similarity theory.  相似文献   

Modern modes of provenance and dispersal of terrigenous sediments in the North Pacific and Bering Sea: implications and perspectives for palaeoenvironmental reconstructions   总被引：1，自引：0，他引：1  

Rong Wang  Boris K. Biskaborn  Arne Ramisch  Jian Ren  Yongzhan Zhang  Rainer Gersonde  Bernhard Diekmann 《Geo-Marine Letters》2016,36(4):259-270

During expedition 202 aboard the RV Sonne in 2009, 39 seafloor surface sediment sites were sampled over a wide sector of the North Pacific and adjoining Bering Sea. The data served to infer land–ocean linkages of terrigenous sediment supply in terms of major sources and modes of sediment transport within an over-regional context. This is based on an integrated approach dealing with grain-size analysis, bulk mineralogy and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy cluster analysis of mineralogical data). The findings on clay mineralogy served to update those of earlier work extracted from the literature. Today, two processes of terrigenous sediment supply prevail in the study area: far-distance aeolian sediment supply to the pelagic North Pacific, and hemipelagic sediment dispersal from nearby land sources via ocean currents along the continental margins and island arcs. Aeolian particles show the finest grain sizes (clay and fine silt), whereas hemipelagic sediments have high abundances of coarse silt. Exposed sites on seamounts and the continental slope are partly swept by strong currents, leading to residual enrichment of fine sand. Four sediment sources can be distinguished on the basis of distinct index minerals revealed by statistical data analysis: dust plumes from central Asia (quartz, illite), altered materials from the volcanic regions of Kamchatka and the Aleutian Arc (smectite), detritus from the Alaskan Cordillera (chlorite, hornblende), and fluvial detritus from far-eastern Siberia and the Alaska mainland (quartz, feldspar, illite). These findings confirm those of former studies but considerably expand the geographic range of this suite of proxies as far south as 39°N in the open North Pacific. The present integrated methodological approach proved useful in identifying the major modern processes of terrigenous sediment supply to the study region. This aspect deserves attention in the selection of sediment core sites for future palaeoenvironmental reconstructions related to aeolian and glacial dynamics, as well as the recognition of palaeo-ocean circulation patterns in general.  相似文献   

Pre-collisional high pressure metamorphism and nappe tectonics at active continental margins: a numerical simulation     

Bernhard Stöckhert  Taras V. Gerya 《地学学报》2005,17(2):102-110

The evolution of a subduction channel and orogenic wedge is simulated in 2D for an active continental margin, with P-T paths being displayed for selected markers. In our simulation, subduction erosion affects the active margin and a structural pattern develops within a few tens of millions of years, with four zones from the trench into the forearc: (i) an accretionary complex of low grade metamorphic sedimentary material, (ii) a wedge of nappes with alternating upper and lower crustal provenance, and minor interleaving of oceanic or hydrated mantle material, (iii) a megascale melange composed of high pressure (HP) and ultra-high pressure (UHP) metamorphic rocks extruded from the subduction channel, and (iv) the upward tilted frontal part of the remaining lid. The P–T paths and time scales correspond to those typically recorded in orogenic belts. The simulation shows that HP/UHP metamorphism of continental crust does not necessarily indicate collision, but that the material can be derived from the active margin by subduction erosion and extruded from the subduction channel beneath the forearc during ongoing subduction.  相似文献   

The NAIAD experiment for WIMP searches at Boulby mine and recent results     

B. Ahmed  G. J. Alner  H. Araujo  J. C. Barton  A. Bewick  M. J. Carson  D. Davidge  J. V. Dawson  T. Gamble  S. P. Hart  R. Hollingworth  A. S. Howard  W. G. Jones  M. K. Joshi  V. A. Kudryavtsev  T. B. Lawson  V. Lebedenko  M. J. Lehner  J. D. Lewin  P. K. Lightfoot  I. Liubarsky  R. Lüscher  J. E. McMillan  B. Morgan  G. Nicklin  S. M. Paling  R. M. Preece  J. J. Quenby  J. W. Roberts  M. Robinson  N. J. T. Smith  P. F. Smith  N. J. C. Spooner  T. J. Sumner  D. R. Tovey 《Astroparticle Physics》2003,19(6):691-702

The NAIAD experiment (NaI Advanced Detector) for weakly interacting massive particle (WIMP) dark matter searches at Boulby mine (UK) is described. The detector consists of an array of encapsulated and unencapsulated NaI(Tl) crystals with high light yield. Six crystals are collecting data at present. Data accumulated by four of them (10.6 kg × year exposure) have been used to set upper limits on the WIMP–nucleon spin-independent and WIMP–proton spin-dependent cross-sections. Pulse shape analysis has been applied to discriminate between nuclear recoils, as may be caused by WIMP interactions, and electron recoils due to gamma background. Various calibrations of crystals are presented.  相似文献